You can increase productivity and accelerate the drying time of water borne and solvent-based coatings by using a Spray Systems Industrial Drying Enclosures. Add our Turbulator Fan System (TFS) to your Industrial Drying Enclosure and notice lower overall operating costs and increased productivity as the turbulent air flow decreases your drying time. Drying Enclosures for spray booths can be equipped with infrared and/or convection curing systems in conjunction with the Spray Systems TFS.
High Quality and Durable Finish
When it is critical for you to produce a high quality finish, the Industrial Drying Enclosure with the optional TFS System is key to your success. It speeds the drying time which results in optimum curing, and provides the best quality and most durable finish for you.
Environmentally Safe
Each Industrial Drying Enclosure for spray booths meets safety and code requirements – NFPA-33, and IFC to protect those that work in any general manufacturing spray environment.
Standard Design Features
Dimensions:
Work dimensions: 26’-0”x 14’-0”x 9’-0”
Overall dimensions: 26’-2”x 14’-11” x 9’-2”
Dry Room/Door Construction:
18 gauge G90 galvanized prime steel
Prepunched holes on 6” centers
Easy nut and bolt assembly
Net opening: 8’ -9½” high x 9’ -2¼” wide
Heavy duty safety latches
Side Access Door:
36” x 84” with observation window
Heavy duty safety latch
Lighting:
2 – High Efficiency Fluorescent light fixtures
UL Approved, 48”, 4-tube (T-8) 120 Volt
Positive dust tight seals
Exhaust Fan/Motor:
High Efficiency 12” Tubeaxial fan with ½ HP TEFC Motor – 208/230/460V-60hz-3PH
Non sparking blade, enclosed belts and bearings
Capable of exhausting 1,400 CFM at I/4” S.P.
Draft Gauge:
Dwyer Mark II manometer to indicate replacement of filters
Intake Filters:
4 – Viledon intake filters, Type 1
20” x 25” with built in reinforcement frames
Miscellaneous:
All necessary hardware and caulking is included
Options:
Turbulence Fan System (TFS)
Additional lighting / Additional length
Convection Curing System